The Ceramic resin bonds with your factory clear coat. Once cured, the resin can only be removed through abrasion. We guarantee Ceramic Coating protection qualities for 5 years however performance can continue well beyond this period. 

​

 

 

Our ceramic coating is a very thin and flexible resin used by leading paint and panel shops and will not damage cured clear coats or void any automotive paint warranties. For repainted vehicles, Ceramic Coating should not be applied for 30 days after repainting or for the duration your paint manufacturer specifies.

​

​

 

No, Ceramic Coating is a very thin and flexible resin that bonds to the surface of your clear coat. It cannot crack or peel and the ceramic particles will not turn yellow.

​

​

 

Yes, Ceramic Coating provides your vehicle with some additional scratch resistance by bonding with the paint on your vehicle and producing a thin, outer layer that is harder than your factory clear coat. Ceramic Coatings are not scratch proof though and some factory clear coats are also softer than others. Ceramic Coating will work to reduce light scratches over the life of the vehicle.

​

​

 

No. Once Ceramic Coating is applied there is no need to wax your car. The Ceramic Coating resin provides far more protection and hydrophobic properties than any wax can provide, and by waxing you may damage the coating's hydrophobic effect over time. If you would like to top your Ceramic Coating with additional products, we recommend using only Ceramic Boost and not to use carnauba based waxes or polishes.

​

 

 

Yes! Always dry your vehicle after washing and do not allow tap water to dry on the vehicle. Tap water contains minerals and if allowed to evaporate on the surface, the minerals left behind can be difficult to remove.

​

 

 

Ceramic Coating will prevent water spots from penetrating into the lower paint layers and causing permanent damage, however in most cases it cannot prevent water spots from bonding on top of the surface. To avoid water spots, wash your vehicle regularly to remove road grime and always dry your vehicle.

​

​

 

No! Ceramic coatings do not prevent rock chips. If you are seeking a solution for stone chips please contact us regarding our Paint Protection Film services.

​

​

 

The standard process takes 1 day, or can take multiple days depending on the level of service you are requesting. This is due to our extensive preparation processes and care taken on the vehicles we work on to ensure the highest quality work is delivered.

​

​

​

Yes. Ceramic Coating does require an annual wash/inspection to be performed within 30 days before or after the annual application date.  The annual wash is to inspect the self-cleaning hydrophobic properties of the coating.  If the vehicle has lost some of the hydrophobic properties, a rejuvenator will be applied to regain original performance / functionality.

​

​

​

Let's leave that to the professionals.